Description
| SN | Parameters | Specification |
|---|---|---|
| INVERTER OUTPUT | ||
| 1. | Phase | Three Phase |
| 2. | Voltage | 230V± 10 (at no load) 220V ± 5% (at full load) |
| 3. | Frequency | 50Hz ± 0.5Hz |
| 4. | Output Load | 15kVA |
| 5. | Peak Efficiency | >85% |
| 6. | Crest factor | >3:1 |
| 7. | Total Harmonic Distortion | < 3% (At Linear Load) |
| BATTERY | ||
| 8. | Nominal Battery Voltage | 240V |
| 9. | Type | 12V/100AH to 200AH (Max.) |
| 10. | Back up time | Depending on battery AH & Load |
| AC INPUT | ||
| 11. | Phase | Three Phase |
| 12. | Mains input voltage range | 160V-290V |
| 13. | Input Frequency | 45 to 55Hz |
| 14. | Mains low cut | 170V ± 10V |
| 15. | Mains low-cut recovery | 180V ± 10V |
| 16. | Mains high cut | 280V ± 10V |
| 17. | Mains high cut recovery | 270V ± WV |
| BATTERY CHARGER | ||
| 18. | Charging Current | 14A±1A |
| 19. | Boost charging voltage | 288V ± 4V |
| 20. | Float charging voltage | 274V ± 4V |
| 21. | Charging Technique | 5 stage ATM pulse Charging |
| CHANGE OVER TIME | ||
| 22. | Mains to Inverter | < 1.5sec. |
| PROTECTIONS | ||
| 23. | Over load Protection | >100% ± 3% (With Auto Reset Function) |
| 24. | Battery voltage low Protection | 208V ± 4V |
| 25. | Mains MCB trip Protection | |
| 26. | Short circuits Protection | >300% Load (With Manual Reset Function) |
| 27. | Thermal Protection | >90°C |
| 28. | Backlight 16×2 Lines LCD Screen with indications and Alarm | |
| LCD PANEL DISPLAY | ||
| 29. | Load Levels with bar graph | |
| 30. | All warning and protections | |
| 31. | 0/P and AC mains Voltage and frequency | |
| 32. | Battery voltage | |
| 33. | Switch status and system capacity | |
| ENVIRONMENTAL PARAMETERS | ||
| 34. | Operating Temperature | 0 to 45°C |
| 35. | Relative Noise | < 50db |
| 36. | Humidity | 0 to 90% non condensing |
| DIMENSION |
Reviews
There are no reviews yet.